Home / Products / Floor Deck Roll Forming Machine / Metal Roofing Deck Rolling Machine

loading

Share to:

Metal Roofing Deck Rolling Machine

Availability:
Quantity:


Introducing the Metal Roofing Deck Rolling Machine, a cutting-edge solution designed to revolutionize the roofing industry. This state-of-the-art equipment is meticulously crafted to deliver unparalleled performance, efficiency, and precision, making it an indispensable asset for any roofing professional or contractor. Crafted with the utmost attention to detail, this machine boasts a robust and durable construction, ensuring longevity and reliability even in the most demanding work environments. Its sturdy frame, made from high-quality materials, guarantees stability and resistance to wear and tear, allowing for seamless operation and consistent results. Equipped with advanced technology, the Metal Roofing Deck Rolling Machine offers exceptional versatility and adaptability. With its user-friendly interface and intuitive controls, operators can effortlessly adjust settings and parameters to meet specific project requirements. This flexibility enables the machine to accommodate various roofing materials, including metal sheets of different thicknesses and widths, ensuring optimal performance across a wide range of applications. The precision-engineered rollers of this machine play a pivotal role in delivering flawless results. Designed to exert the ideal amount of pressure, these rollers ensure uniformity and consistency in the formation of roofing decks. This meticulous attention to detail guarantees a smooth and seamless finish, minimizing the risk of leaks and enhancing the overall structural integrity of the roof.

Design Idea

Logo press: add the logo press for customer, the logo will be pressed when the share part do the shearing job.Good shearing: shearing system adopt double oil cylinder 7.5kw motor, more stable than single oil cylinder and can guarantee the cutter can cut 1.5mm thickness material easily.

Stable-transmission: 2 inches double chain with chain tensors.



Profile Drawing For Reference

We made many floor decking machines for the North American countries, such as the America,
Canada, Mexico. Especially for the America, we already sent many floor decking machines to there, we have customer from New York,Florida, Texas, California as so on.
The floor decking machine America use are almost same and standard,1.5B type is one they normally used. and the material thickness they used are Gauges 16 18 20 22 as so on. Most of the metal floor decking panel are 36” effective width and 48” input material width.


Specifications

  • Rib height 1 ½"

  • 6" Center to center

  • 6 Major Ribs

  • Coverrage 36"

  • Guages 18,20 and 22

  • Finishes G60 and G90



Processing Flow

Decoiler-feeding material-roll forming-cutting-receiving the product


1.5B metal roof deck floor decking panel machine for north america


Raw material

Galvanized coils yield strength till 550 Mpa

Material thickness:16-22gauge( 0.8-1.5 mm)

Machine frame

400 H beam steel welded

Roller fixer

Middle plate (thickness 20mm)

Material of rollers

Gcr15 quenching treat HRC58-60

Forming stations

28 roller stations

Diameter of shafts

φ 95 mm

Material of shafts

45# steel precision-machined

Forming speed

0-15 m per minute

Voltage

480 v 60 hz 3 phase or as request

Transmission way

Gear and 2 inches double chain with chain tensors

Drive motor

Power:18.5 kw x 2 sets
installation: inside the machine

Cutting blade material

Cr12Mov quenched treatment to improve hardness

Cutting type

Hydraulic cutting

Dimension of the machine

15000 х 1850 х 1500 mm

Weight

about 15.5 t




12 Tons Hydraulic Decoiler With Loading Car

Loading capacity: 12t
Max coil width: 1250mm
Coil inner diameter: 480-610mm
Hydraulic mandrel expansion
Electric motor mandrel drive
Hydraulic motor power: 5.5kw
Drive motor power: 7.5kw



Feeding Device

1.Hand wheels on both sides can be used to adjust the feeding width. 2.Touch stainless rollers can make the material go into the machine smoothly and prevent the scratch on the material surface. 3.There are three rows of orange plastic rubber rollers can make the steel coil go into the machine smoothly.



Roll Forming Device

1.rollers Gcr15 quenching treat HRC58-60 good hardness for long service time.
2. Each roller has number and with keynotes, it can fix on the shaft stablely


Transmission Device

1.Gear and 2 inches double chain drive,strong and stable. 2.chain tensors design- can guarantee the chain is not loose after long time use



Hydraulic Cutting Device

1.Adopt double oil cylinder more stable than single oil cylinder

2.Logo press device added




PLC Control System

Brand

PLC brand : Delta

Inverter brand: Delta Low electric part: Schneider

Encoder: Omron

Function:

  1. Adopted aviation plugs,easy installation. 2.Full automatic easy operation. 3.Operation language:English(provide customized) 4.National coinsurance,spar parts Brand Siemens and Schneider.



Hydraulic Station

7.5kw motor with cooling system for long time using.


Spar Parts

Our machine warranty time 2 years and the below spare parts are with the machine send to you free of charge


Previous: 
Next: 

Related Products

Get A Quote

Phone:  +86-3175670260

Tel:  +86-15612731108

Skype/whatsApp:  +86-15612731108

Address:  N0.4 Road, Economic Develop Zone, Botou County, Cangzhou, Hebei, China

Quick Links

Product Category

Product Category

Copyright © 2023 General Industry Tech Hebei Developing Co., Ltd. All rights reserved. | Sitemap | Privacy Policy | Support By Leadong